Table 51. HTTP Device n Settings details(continued)
Option Description
Prefix Length: IPv6 Prefix Length (0-128) for this HTTP Device.
VLAN Enables VLAN for HTTP device. This option is set to Enable or Disable. This option is set to
Disable by default.
VLAN ID Shows the VLAN ID for the HTTP device
VLAN Priority Shows the VLAN Priority for the HTTP device.
DHCP Enables or disables DHCP for this HTTP device. This option is set to Enable by default.
IP Address Specifies IP address for the HTTP device.
Subnet Mask Specifies subnet mask for the HTTP device.
Gateway Specifies gateway for the HTTP device.
DNS info via DHCP Enables or disables DNS Information from DHCP. This option is set to Enable by default.
Primary DNS Specifies the primary DNS server IP address for the HTTP Device.
Secondary DNS Specifies the secondary DNS server IP address for the HTTP Device.
URI (will obtain from
DHCP server if not
specified)
The URI will be obtained from the DHCP server if not specified.
TLS Authentication
Configuration
View and/or modify this device's boot TLS authentication configuration.
Table 52. UEFI ISCSI Settings screen details
Option Description
ISCSI Initiator Name Specifies the name of the ISCSI initiator in IQN format.
ISCSI Device1 Enables or disables the ISCSI device. When disabled, a UEFI boot option is created for
the ISCSI device automatically. This is set to Disabled by default.
ISCSI Device1 Settings Enables you to control the configuration of the ISCSI device.
Table 53. ISCSI Device1 Settings screen details
Option Description
Connection 1 Enables or disables the ISCSI connection. This option is set to Disable by default.
Connection 2 Enables or disables the ISCSI connection. This option is set to Disable by default.
Connection 1 Settings Enables you to control the configuration for the ISCSI connection.
Connection 2 Settings Enables you to control the configuration for the ISCSI connection.
Connection Order Enables you to control the order for which the ISCSI connections will be
attempted.
Table 54. UEFI NVMe-oF Settings screen details
Option Description
NVMe-oF Enables or disables the NVMe-oF device. When disabled, a UEFI boot option is created
for the NVMe-oF device automatically. This is set to Disabled by default.
NVMe-oF Host NQN Specifies Host NQN of the NVMe-oF device.
NVMe-oF Host Id Specifies Host Id of the NVMe-oF device.
Host Security Key Path Specifies Host Security Key Path of the NVMe-oF device.
NVMe-oF SubSystem Settings Enables you to control the configuration of the NVMe-oF device.
Pre-operating system management applications 49
To Next Page
Loading...
