Figure 76. 10 x 2.5-inch SAS/SATA with Front PERC 12
Table 76. 10 x 2.5-inch SAS/SATA with Front PERC 12
Order From To
1 SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
2 CTRL_SRC_SB1 (fPERC controller connector) BP_DST_SB1 (backplane signal connector)
3 CTRL_SRC_SA1 (fPERC controller connector) BP_DST_SA1 (backplane signal connector)
4 SL3_CPU1_PA1 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
5 SL4_CPU1_PB1 (signal connector on system board) CTRL_DST_PB1 (fPERC input connector)
Figure 77. 10 x 2.5-inch and 4 x Universal PCIe Gen4 with Front PERC 11
Table 77. 10 x 2.5-inch and 4 x Universal PCIe Gen4 with Front PERC 11
Order From To
1 SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
2 SL1_CPU2_PA4 (signal connector on system board) BP_DST_PB2 (backplane signal connector)
3 SL3_CPU1_PA1 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
4 SL4_CPU1_PB1 (signal connector on system board) BP_DST_PA3 (backplane signal connector)
5 CTRL_SRC_SB1 (fPERC controller connector) BP_DST_SB1 (backplane signal connector)
102 Installing and removing system components
To Next Page
Loading...
