Figure 80. 10 x 2.5-inch SAS/SATA RAID with Front PERC 12 and Rear 2 x 2.5-inch
Table 80. 10 x 2.5-inch SAS/SATA RAID with Front PERC 12 and Rear 2 x 2.5-inch
Order From To
1 SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
2 CTRL_SRC_SA1 (fPERC controller connector) BP_DST_SA1 (backplane signal connector)
3 SL3_CPU1_PA1 (signal connector on system board) CTRL_DST_PA1 (fPERC input connector)
4 SL4_CPU1_PB1 (signal connector on system board) CTRL_DST_PB1 (fPERC input connector)
5 CTRL_SRC_SB1 (fPERC controller connector) R_BP_DST_SA1 and R_BP_DST_SB1 (rear
backplane signal connector)
6 SIG_PWR_0 (system board power connector) R_BP_PWR_1 (rear backplane power connector)
Figure 81. 10 x NVme PCIe Gen4
Table 81. 10 x NVme PCIe Gen4
Order From To
1 SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
2 SL1_CPU2_PA4 (signal connector on system board) BP_DST_PA1 (backplane signal connector)
3 SL2_CPU2_PB4 (signal connector on system board) BP_DST_PB1 (backplane signal connector)
4 SL3_CPU1_PA1 (signal connector on system board) BP_DST_PA2 (backplane signal connector)
5 SL4_CPU1_PB1 (signal connector on system board) BP_DST_PB2 (backplane signal connector)
6 SL5_CPU1_PB2 (signal connector on system board) BP_DST_PA3 (backplane signal connector)
104 Installing and removing system components
To Next Page
Loading...
