Dell PowerEdge R6625 - Page 126

Figure 108. Riser 3S
1. Slot 3
Figure 109. Riser 2S
1. Slot 1
NOTE: The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 86. Expansion card riser configurations
PCIe
slot
With
Regular
shroud
R2A R3A R2P R3P R1P R4P R2Q R3P R2S R3S
Slot 1
Full
height -
Half
length
x16 LP -
x16 LP
(Gen5)
-
x16 FH
(Gen5)
-
x16 LP
(Gen5)
-
x16 LP
(Gen5)
-
Slot 2
Full
height -
x16 LP - x16 LP - -
x16 FH
(Gen5)
x16 LP
(Gen5)
- - -
126 Installing and removing system components