Figure 117. Removing the expansion card riser (Riser 3)
5. For Riser 4P, loosen the captive screw on the riser, and then press the blue release tab on the riser, and holding the touch
point lift the expansion card riser from the riser connector on the system board.
Figure 118. Removing the expansion card riser (Riser 4)
Next steps
1. Replace the expansion card riser.
Installing the expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Installing and removing system components
143
To Next Page
Loading...
