Dell PowerEdge R6625 - M.2 SSD module on BOSS-N1 adapter card

Figure 147. Installing the BOSS-N1 card carrier
Next steps
1. Follow the procedure listed in the After working inside your system.
M.2 SSD module on BOSS-N1 adapter card
Removing the M.2 SSD module
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
3. Remove the BOSS card. The BOSS card removal is similar to removing expansion card from the expansion card riser.
Installing and removing system components
163