EasyManua.ls Logo

Dell PowerEdge R6625 - Extended Ambient Temperature Guidelines

Dell PowerEdge R6625
220 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 31. Thermal restriction matrix for memory configuration (continued)
Configurat
ion
4 x 3.5-inch SAS 10 x 2.5-inch SAS 8 x 2.5-inch NVMe No BP
Rear
configurati
on
3 LP/ 2 FH 3 LP/ 2 FH Rear 2 x 2.5-
inch SAS
3 LP/ 2 FH 2LP 3 LP
DIMM
Configurat
ion
STD Fan HPR Gold fan
64 GB
RDIMM
35°C 35°C 35°C 35°C 35°C 35°C
128 GB
RDIMM
N/A 35°C 35°C 35°C 35°C 35°C
Thermal restriction for Direct Liquid Cooling
There are no thermal restriction to support all processors for liquid cooling configuration.
NOTE: DIMM blank is not required for liquid cooling configuration. For single processor configuration, Processor DIMM
blank is required to be installed in the Processor 2 location.
Extended Ambient Temperature Guidelines
The below tables provides the extended ambient temperature guidelines for various configurations listed below.
Table 32. Extended Ambient Temperature Guideline: 10 x 2.5-inch storage configuration
Dell PowerEdge Server Standard
Operating Support (ASHRAE A2
compliant) All options supported
unless otherwise noted.
Dell PowerEdge Server Extended
Ambient 40°C Operating Support
(ASHRAE A3 compliant)
Dell PowerEdge Server Extended
Ambient 45°C Operating Support
(ASHRAE A4 compliant)
CPU > 300 W are not supported 64 Gb or greater capacity RDIMMs are
not supported
64 Gb or greater capacity RDIMMs are
not supported
Maximum 30°C for CPU > 240 W CPU > 195 W are not supported CPU > 155 W are not supported
Rear drives are not supported Rear drives are not supported
2.5-inch NVMe storage are not
supported
2.5-inch NVMe storage are not
supported
A2 GPU is not supported BOSS-N1 is not supported
Two power supplies are required. System
performance may be reduced in the
event of a PSU failure
A2 GPU is not supported
Non-Dell qualified peripheral cards
and/or peripheral cards greater than 25
W are not supported
Two power supplies are required. System
performance may be reduced in the
event of a PSU failure
85°C active optics cable or DAC cable is
required
Non-Dell qualified peripheral cards
and/or peripheral cards greater than 25
W are not supported
OCP 3.0 are not supported
85°C active optics cable or DAC cable is
required
36 Technical specifications

Table of Contents

Related product manuals