Dell PowerEdge R730xd - Cable Retention Bracket; Removing the Cable Retention Bracket

Figure 46. Opening the PCIe card holder latch
1. PCIe card holder 2. release tab
3. PCIe card holder latch
Figure 47. Closing the PCIe card holder latch
1. PCIe card holder 2. release tab
3. PCIe card holder latch
Next steps
Follow the procedure listed in the After working inside your system section.
Cable retention bracket
Cable retention bracket provides support to the installed cables. The cable retention bracket also helps to
prevent the cables from moving out of place, which may result in loose connections and reduced air flow
inside the server.
Removing the cable retention bracket
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. If installed, remove the cooling shroud.
4. Remove the PCIe card holder.
5. Remove all cables routed through the cable retention bracket.
121