EasyManua.ls Logo

Dell PowerEdge R730xd - Diagnostic Indicators

Dell PowerEdge R730xd
239 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Item Indicator, button, or
connector
Icon Description
3 iDRAC8 Enterprise port Dedicated management port.
4 Half-height PCIe
expansion card slot (3)
Enables you to connect up to three half-height PCI
Express expansion cards.
5 Serial connector Enables you to connect a serial device to the
system.
6 Video connector Enables you to connect a VGA display to the
system.
7 USB port (2) Enables you to connect USB devices to the system.
The ports are USB 3.0-compliant.
8
Full-height PCIe
expansion card slot (3)
Enables you to connect up to three full-height PCI
Express expansion cards.
9 Ethernet connector (4) Four integrated 10/100/1000 Mbps Network
Interface Card (NIC) connectors
or
Four integrated connectors that include:
Two 10/100/1000 Mbps NIC connectors
Two 100 Mbps/1 Gbps/10 Gbps SFP+/10 GbE T
connectors
10 Power supply unit (PSU1)
AC 495 W, 750 W, or 1100 W
or
DC 750 W or 1100 W
11 Power supply unit
(PSU2)
12 vFlash media card slot
Enables you to insert a vFlash media card.
13 Hard drive (2) (back) Up to two hot-swappable 2.5-inch hard drives.
Diagnostic indicators
The diagnostic indicators on the system front panel display system status during system startup.
NOTE: The diagnostic indicators are not present if the system is equipped with an LCD display.
NOTE: No diagnostic indicators are lit when the system is turned off. To start the system, plug it into
a working power source and press the power button.
18

Table of Contents

Other manuals for Dell PowerEdge R730xd

Related product manuals