Dell PowerEdge R730xd - Quick Sync Indicator Codes; Locating Service Tag of Your System

Quick Sync indicator codes
Figure 12. Quick Sync
1. Quick Sync Status Indicator 2. Quick Sync Activation Button
Table 13. Quick Sync indicator codes
Quick Sync
indicator pattern
Condition
Slow blink Quick Sync is waiting to be configured from iDRAC.
Solid Quick Sync is ready to transfer.
Blinks three times
rapidly and then
turns off
Quick Sync feature is disabled from iDRAC.
Blinks continuously
when the mobile
device touches
antenna
Indicates data transfer activity.
Blinks rapidly
continuously when
the activation button
is pressed
Quick Sync hardware is not responding properly.
Turns off Indicates that the Quick Sync feature is turned off. Use the activation button to
activate it. If pressing the activation button does not turn on the LEDs, it indicates
that power is not delivered to the Quick Sync bezel.
Locating Service Tag of your system
Your system is identified by a unique Express Service Code and Service Tag number. The Express Service
Code and Service Tag are found on the front of the system by pulling out the information tag.
27