8. Using the Phillips #1 screwdriver, secure the M.2 SSD on the BOSS S2 card carrier with the M3 x 0.5 x 4.5 mm screw.
Figure 145. Installing the M.2 SSD
9. Slide the BOSS S2 card carrier into the BOSS S2 module slot.
10. Close the BOSS S2 card carrier release latch to lock the carrier in place.
Figure 146. Installing the BOSS S2 card carrier
Next steps
1. Follow the procedure listed in the After working inside your system.
Installing and removing system components
135
To Next Page
Loading...
