Dell PowerEdge R7615 - Page 128

Figure 90. 24 x 2.5 inch SAS/SATA with 8 x Universal drives with FPERC12
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 85. 24 x 2.5 inch SAS/SATA with 8 x Universal drives with FPERC12
Order From To
1 SL7_CPU1_PB4 (signal connector on
system board)
DST_PA2 (backplane signal connector)
2 SL8_CPU1_PA4 (signal connector on
system board)
DST_PB2 (backplane signal connector)
3 CTRL_DST_PB1 (fPERC input
connector)
SL3_CPU1_PB2 (signal connector on
system board)
4 CTRL_DST_PA1 (fPERC input
connector)
SL1_CPU1_PB2 (signal connector on
system board)
5 SIG_PWR_2 (system board power
connector)
BP_PWR_2 (backplane power
connector)
6 SL2_CPU1_PB2 (signal connector on
system board)
DST_PB1 (backplane signal connector)
7 SL4_CPU1_PB2 (signal connector on
system board)
DST_PA1(backplane signal connector)
8 CTRL_SRC_SA1 (fPERC controller
connector)
BP_DST_SA2 (backplane signal
connector)
9 CTRL_SRC_SB1 (fPERC controller
connector)
BP_DST_SB1 (backplane signal
connector)
10 SIG_PWR_1 (system board power
connector)
BP_PWR_1 (backplane power
connector)
128 Installing and removing system components