Dell PowerEdge R7625 - Page 116

Figure 83. C2-7-R1: 12 x 3.5-inch SAS3/SATA RAID (w/ APERC11_R1) -1 CPU
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 81. 12 x 3.5-inch SAS3/SATA RAID (w/ APERC11_R1) -1 CPU
Order From To
1 SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
2 CTRL_SRC_SA1 (adapter PERC controller
connector)
BP_DST_SA1 (backplane signal connector)
3 CTRL_SRC_SB1 (adapter PERC controller
connector)
BP_DST_SB1 (backplane signal connector)
116 Installing and removing system components