Dell PowerEdge R7625 - Page 118

Figure 85. C3-1: 8 x U.2 G4
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 83. 8 x U.2 G4
Order From To
1 SL1_CPU2_PA4 (signal connector on system
board)
DST_PA1 (backplane signal connector)
2 SL2_CPU2_PB4 (signal connector on system
board)
DST_PB1 (backplane signal connector)
3 SL3_CPU1_PA1 (signal connector on system
board) and SL4_CPU1_PB1 (signal connector on
system board)
DST_PA2 (backplane signal connector) and
DST_PB2 (backplane signal connector)
4 SIG_PWR_1 (system board power connector) BP_PWR_1 (backplane power connector)
118 Installing and removing system components