Dell PowerEdge R830 - Installing a 2.5-Inch Hard Drive Blank

Figure 73. Removing a 2.5-inch hard drive blank
1. hard drive blank 2. release button
Related links
Safety instructions
Removing the optional front bezel
Installing a 2.5-inch hard drive blank
Installing a 2.5-inch hard drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 74. Installing a 2.5-inch hard drive blank
1.
hard drive blank
Next steps
If removed, install the front bezel.
Related links
Safety instructions
Removing the optional front bezel
Installing the optional front bezel
Removing a 2.5-inch hard drive blank
132