Dell PowerEdge R910 - Hardware Owners Manual Updates

8 Information Update
Hardware Owner’s Manual Updates
System Board Jumper Settings Update
This update supersedes the information provided in the Hardware Owner's
Manual at support.dell.com/manuals.
To locate the system board jumpers, see Figure 1.
Table 3. System Board Jumper Settings
Jumper Setting Description
PSWD_EN (default) The password feature is enabled (pins 2-4)
The password feature is disabled, and
iDRAC6 local access is unlocked at the
next AC power cycle (pins 4-6)
NVRAM_CLR (default) The configuration settings are retained at
system boot (pins 3-5)
The configuration settings are cleared at
the next system boot (pins 1-3)