Figure 96. Installing the 2.5 inch (x24) SAS/SATA backplane
1
backplane jumper connector for the expander daughter
card
2 release tab (2)
3 hard drive connector (24) 4 backplane hook (8)
5 backplane power cable (2) 6 power connector on the system board (2)
7 memory riser guide 8 miscellaneous signal connector on the system board
9 backplane miscellaneous signal cable 10 guide
11 backplane jumper connector 12 expander connector
Installing and removing system components 165
To Next Page
Loading...
