Dell PowerEdge T100 - Disabling a Forgotten Password

Using the System Setup Program 43
NOTE: You can use the Password Status option in conjunction with the Setup
Password option to protect the system password from unauthorized changes.
Deleting or Changing an Existing Setup Password
1 Enter the System Setup program and select the System Security option.
2 Highlight the Setup Password option, press <Enter> to access the setup
password window, and press <Enter> twice to clear the existing setup
password.
The setting changes to
Not Enabled .
3 If you want to assign a new setup password, perform the steps in "Assigning
a Setup Password" on page 42.
Disabling a Forgotten Password
See "Disabling a Forgotten Password" on page 139.
book.book Page 43 Wednesday, June 24, 2009 8:21 AM