Dell PowerEdge T110 II - 5 Power, Thermal, Acoustic; Power Supplies; Power Supply Specifications; Heat Dissipation

PowerEdge T110 II Technical Guide 18
5 Power, Thermal, Acoustic
5.1 Power Supplies
The base PowerEdge T110 II system includes a single 305W power supply. This unit provides power to
the planar, the internal drive bays. Power is
soft-switched, allowing power cycling using a switch on the front of the system enclosure or through
software control (server management functions). The power system is compatible with industry
standards, such as ACPI and Server 2000.
5.2 Power Supply Specifications
Power Supply Specifications Table 3.
Feature
Non-redundant Power Supply
Dimensions
L-140mm x W-150mm x H-98mm
Status Indicators
N/A
Integrated Fans
Yes
Fixed Input Plug
Yes
AC Cord Rating
15A @ 120 VAC, 10A @ 240 VAC
Input Voltage
90264 VAC
Auto-ranging
Yes
Line Frequency
47Hz63Hz
Maximum Inrush Current
58A for 10 ms or less
Hot-Swap Capability
No
Output Power
305 Watts
Maximum Heat Dissipation
1300 BTU per hour
Efficiency (20% - 100% Load)
80% @ 115 VAC
5.3 Heat Dissipation
The heat dissipation for the T110 II power supply is measured at 1300 BTU/hr (maximum).