EasyManua.ls Logo

Dell PowerEdge T20 Series - Physical Specifications; Environmental Specifications

Dell PowerEdge T20 Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 6. Physical specifications
Physical
Height 36.29 cm (14.29 inch) with feet
36.0 cm (14.17 inch) without feet
Width 17.5 cm (6.88 inch)
Depth 43.5 cm (17.12 inch) with bezel
40.0 cm (15.75 inch) without bezel
Maximum configuration weight 8.6 kg (18.95 lb)
Empty weight 8 kg (17.64 lb)
Table 7. Environmental specifications
Environmental
NOTE: For additional information about environmental measurements for specific system configurations, see
dell.com/environmental_datasheets.
Temperature
Operating Continuous operation: 10 °C to 35 °C at 10% to 80% relative humidity
(RH), with 26 °C maximum dew point. De-rate maximum allowable dry
bulb temperature at 1 °C/300 m above 900 m (1°F per 550 ft).
NOTE: For information on supported expanded operating
temperature range and configurations, see dell.com/support/
manuals.
Storage –40 °C to 65 °C (–40 °F to 149 °F) with a maximum temperature
gradation of 20 °C per hour
Relative humidity
Operating 20% to 80% (noncondensing) at a maximum wet bulb temperature of 29
°C (84.2 °F)
Storage 5% to 95% at a maximum wet bulb temperature of 38 °C (100.4 °F)
Maximum vibration
Operating 0.26 G
rms
at 5 Hz to 350 Hz (all operation orientations)
Non-operating 2.2 G
rms
at 5 Hz to 500 Hz for 15 min (all six sides tested)
Maximum shock
Operating One shock pulse (all operating orientations) of 40 G for 2 ms in the
operational orientation
Non-operating Six consecutively executed shock pulses in the positive and negative x,
y, and z axes (one pulse on each side of the system) of 71 G/2 ms half
sine shock
7

Related product manuals