Dell PowerEdge T310 - 4 Mechanical; Chassis; Dimensions and Weight; Figure 1. Chassis Dimensions and Weight

Dell
PowerEdge T310 Technical Guide
13
4 Mechanical
4.1 Chassis
The Dell™ PowerEdge™ T310 is a tower form-factor server that supports the following features:
 Flexible power supply (redundant or non-redundant)
 Common power-supply bay to accommodate two power supplies (non-redundant and
redundant)
 Two fixed hard drive cages (cabled and hot-plug chassis)
 User-friendly chassis—most devices are toolless:
o Hard drives (cabled and hot-plug)
o Optical drive and tape backup unit
o Fans
o Expansion cards
o Planar
o Backplane
o Power distribution board
o Redundant power supply (non-redundant power supply is secured with three screws)
4.1.1 Dimensions and Weight
Xa
Xb
Ya
Yb
Yc
Za
(with
bezel)
Za
(without
bezel)
Zb*
Zc
Max
Weight
217.9mm
NA
430.3mm
440.1mm
NA
37.0mm
21.5mm
483.5mm
517.0mm
23.5kg
(51.8lbs)
*Note: Zb goes to the nominal back wall external surface where the motherboard I/O connectors reside.
Figure 1. Chassis Dimensions and Weight