Installation And Configuration
WARNING: Before performing the following procedure, review the safety instructions that came with the system.
Unpacking The System
Unpack your system and identify each item.
Optional—Rack Configuration
If you are using the optional rack configuration, assemble the rails and install the system in the rack following the safety
instructions and the rack installation instructions provided with your system.
Stabilizing The Tower System
WARNING: The tower system has four feet on its bottom panel that can be extended outward to help properly
stabilize the system. Failure to extend the feet poses the risk of having the system tip over, possibly causing bodily
injury or damage to the system.
Figure 1. Extending the Feet of the Tower System
3
To Next Page
Loading...
