Dell PowerEdge T630 - Installing a 2.5-Inch Hard Drive Blank

CAUTION: To maintain proper system cooling, all empty hard drive slots must have hard drive
blanks installed.
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the bezel.
Steps
Press the release button and slide the hard drive blank out of the hard drive slot.
Figure 36. Removing a 2.5-inch hard drive blank
1. hard drive blank 2. release button
Related Links
Safety instructions
Installing a 2.5-inch hard drive blank
Installing a 2.5-inch hard drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
107