EasyManua.ls Logo

Dell PowerEdge T630 - Processor and PSU Specifications

Dell PowerEdge T630
221 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chassis weight
Table 12. Chassis weight
PowerEdge T630 Maximum weight
3.5 inch hard-drive chassis
49.65 kg
2.5 inch hard-drive chassis
42.36 kg
Processor specifications
The PowerEdge T630 system supports up to two Intel Xeon E5-2600 v4 or Xeon E5-2600 v3 product
family processors.
PSU specifications
The PowerEdge T630 system supports up to two AC or DC redundant power supply units (PSUs).
Table 13. PSU specifications
PSU Class Heat dissipation
(maximum)
Frequency Voltage
495 W AC Platinum 1908 BTU/hr 50/60 Hz 100–240 V AC, autoranging
750 W AC Platinum 2891 BTU/hr
Titanium 2843 BTU/hr 200–240 V AC, autoranging
1100 W AC Platinum 4100 BTU/hr 100–240 V AC, autoranging
1600 W AC Platinum 6000 BTU/hr 100–240 V AC, autoranging
1100 W DC (for
China only)
NA 4416 BTU/hr –(48–60) V DC
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: This system is also designed to connect to the IT power systems with a phase to phase
voltage not exceeding 230 V.
System battery specifications
The PowerEdge T630 system supports CR 2032 3.0-V lithium coin cell system battery.
Expansion bus specifications
The PowerEdge T630 system supports PCI express (PCIe) generation 3 and 2 expansion cards. The
following table describes the supported expansion cards:
37

Table of Contents

Other manuals for Dell PowerEdge T630

Related product manuals