Systems Management Guide 17
Storage
Problem Description Resolution
Health status of
components in
MD1000/MD1120
is not available in
VI Client
Health status of hardware
components like fans,
controller, and power supply of
MD1000/MD1120 is not
available in VI Client.
MD1000/MD1120 is not
supported with ESXi. Health
status of hardware components
of MD1000/MD1120 is not
implemented in ESXi.
RAID10 virtual
disks show up as
"RAID Level
Unknown" in VI
Client
The RAID level 10 is shown as
"RAID Level Unknown" Logical
Volume in VI Client.
This is a known issue with this
release of ESXi.
PERC Battery
health status is
not properly
reported in VI
Client
When battery health status
becomes critical, the battery
status sensor is removed from
the VI Client.
This is a known issue with this
release of ESXi.
VI Client does not
report Critical
Array Assert for
the removed drive
on PE1950
When a drive is removed from a
configured Logical Disk in SAS
6i/R, VI Client does not show
the Critical Array Assert for the
failed drive.
This is a known issue with this
release of ESXi.
VI Client reports
Critical Array
Assert for all
physical drives in a
logical volume if
one physical drive
fails
VI Client reports Critical Array
Assert for all physical drives in a
logical volume if one physical
drive fails.
This is a known issue with this
release of ESXi.
To Next Page
Loading...
