Table 61. Intel Persistent Memory 200 series (BPS) Configuration 6 - 12 x RDIMMs/ LRDIMMs, 2 x Intel
Persistent Memory 200 series (BPS) per processor
Total No of
RDIMMs /
LRDIMMs
Total No of
Intel
Persistent
Memory 200
series (BPS)
DIMMs
1 R/LRDIMM
capacity (GB)
1 Intel
Persistent
Memory 200
series (BPS)
capacity (GB)
Total Standard
Memory Capacity
(GB)
Total PM
Capacity
(GB)
Supported Modes
12 2 16 128 192 256 AD
12 2 32 128 384 256 AD
12 2 64 128 768 256 AD
12 2 128 128 1536 256 AD
12 2 256 128 3072 256 AD
12 2 16 256 192 512 AD
12 2 32 256 384 512 AD
12 2 64 256 768 512 AD
12 2 128 256 1536 512 AD
12 2 256 256 3072 512 AD
12 2 16 512 192 1024 AD
12 2 32 512 384 1024 AD
12 2 64 512 768 1024 AD
12 2 128 512 1536 1024 AD
12 2 256 512 3072 1024 AD
NVDIMM-N memory module installation guidelines
The following are the recommended guidelines for installing NVDIMM-N memory modules:
● Each system supports memory configurations with 1, 2, or 4 NVDIMM-Ns per processor.
● Supported configurations have dual processors and a minimum of 8x RDIMMs.
● Maximum of 8 NVDIMM-Ns can be installed in a system.
● NVDIMM-Ns or RDIMMs must not be mixed with LRDIMMs.
● DDR4 NVDIMM-Ns must be populated only on the black release tabs on processor 1 and 2.
● General memory guideline rules are also applicable.
● All RDIMMs are to populated on slots 0 and all NVDIMMs are populated on slots 1.
NOTE: NVDIMM-N memory slots are not hot-pluggable.
For more information about the supported NVDIMM-N configurations, see the NVDIMM-N User Guide at www.dell.com/
poweredgemanuals.
Table 62. Supported NVDIMM-N for dual processor configurations
Configuration Description Memory population rules
RDIMMs NVDIMM-N
Configuration 1 8x (16 GB/32 GB/64 GB)
RDIMMs + 4x NVDIMM-N
Processor1 {A1, 2, 3, 4}
Processor2 {B1, 2, 3, 4}
Processor1 {A5, 6}
Processor2 {B5, 6}
Configuration 2 8x (16 GB/32 GB/64 GB)
RDIMMs + 8x NVDIMM-N
Processor1 {A1, 2, 3, 4}
Processor2 {B1, 2, 3, 4}
Processor1 {A5, 6, 7, 8}
Processor2 {B5, 6, 7, 8}
Component installation guidelines 67