Upgrade kits
The following table lists the available After Point Of Sale [APOS] upgrade kits.
For detailed instructions for installing a component, see the instructions for replacing the specific component in the PowerFlex
custom node R750 Field Replaceable Unit Guide.
Table 64. Upgrade kits
Kits
Bezel
Boss
BOSS S2
GPU
Accelerator enablement kit
Hard drives
Hard drives SSD
Memory
Network cards (Standard PCIe adapter LP/FH)
Network cards (OCP)
PCIe SSD card
Power cords
Power supplies
Quick sync
TPM
Processor enablement thermal kits
Serial COM port daughter card
Cables
Fans
Heat sink
Risers
Rail
CMA
BOSS S2 module kit
The BOSS S2 module supports up to two M.2 SSDs.
NOTE:
To enable the BOSS S2 module in the system, ensure that the BIOS firmware version is 1.5.5 and iDRAC firmware
version is 4.30.30.30 or later.
5
Upgrade kits 69
To Next Page
Loading...
