Remove a faulted I/O module
Steps
1. Pull the trigger mechanism on the I/O module handle to release it.
CAUTION: Do not pull the node from the base enclosure. Pulling the node from the base enclosure disrupts
the system cache.
Figure 87. Releasing the I/O module
2. Gently pull the I/O module from the slot.
Figure 88. Removing the I/O module
Install an I/O module
Steps
1. Align the module with the empty slot and carefully push the module into the slot.
Figure 89. Installing an I/O module
2. When the I/O module appears seated, push and release the small button on the handle.
84
Base enclosure service procedures
To Next Page
Loading...
