3. Check the appropriate radio button, then press Run to run that maintenance function. If the drive is
in a library, many of the maintenance functions are disabled. To cancel the maintenance function press
Cancel. These are the same maintenance functions that are executed via the unload button on the
drive's front panel.
Note: For more information on Maintenance Function details, see “Selecting a Diagnostic or
Maintenance Function” on page 27.
Fixing SAS Connectivity Problems
If there appears to be a problem connecting or communicating with the drive, follow this procedure.
1. Ensure that the power is on to the tape drive.
2. Replace the SAS cable and interposers, if any, and retry the failing operation.
3. If these measures do not correct the problem, contact Dell customer support.
Figure 23. Drive Maintenance page
Troubleshooting 43
To Next Page
Loading...
