Dell PowerVault MD3200 - Page 25

Hardware Installation 25
• If the status LEDs are blinking amber, there is an error that can be
viewed using PowerVault MDSM.
• If the status LEDs are solid blue, the storage array is ready.
c After the storage array is online and ready, turn on any attached host
systems.
5 Using MDSM, update all attached expansion enclosure firmware if it is out
of date:
a From the EMW, select the enclosure that you want to update and
enter the
Array Management Window (AMW).
b Click Advanced  Maintanence  Download  EMM Firmware .
c Select Select All to update all the attached expansion enclosures
simultaneously.
book.book Page 25 Thursday, July 18, 2013 5:56 PM