Dell PowerVault MD3200 - Cabling Your Direct-Attached Hosts

10 Getting Started With Your System
Turn on the components in the following order:
1
MD12 xx expansion enclosures (if used)
NOTE: Before turning on the RAID enclosure, ensure that the expansion
enclosure status LED is blue.
2 MD32 xx RAID enclosure
NOTE: Before turning on the host server(s), ensure that the RAID enclosure
status LED is blue.
3 Host server(s)
Cabling Your Direct-Attached Hosts
Server 1 Server 2
PowerVault MD32xx
RAID enclosure
Corporate, public,
or private network
Server 3 Server 4