Getting Started With Your System 15
LED Indicators
Front panel
• One two-color LED indicator for
system status
• Two single-color LED indicators for power
and enclosure mode
NOTE: The enclosure mode LED is not
applicable to the PowerVault MD32xx RAID
enclosure.
Hard-drive carrier
• One single-color activity LED
• One two-color LED status indicator per
drive
Power supply/cooling fan Three LED status indicators for power supply
status, power supply/fan fault, and AC status
RAID controller module Six single-color LEDs:
• One battery fault
• One cache active
• One controller fault
• One controller power
• One system identification
• One management Ethernet activity
Six two-color LEDs:
• Four SAS IN link or fault
• One SAS OUT link or fault
• One management Ethernet link speed
To Next Page
Loading...
