Dell PowerVault MD3220 - Create Iscsi Initiator; Create RAID Virtual Disk (Automatic Physical Disk Select)

Script Commands 131
Create iSCSI Initiator
This command creates a new iSCSI initiator object.
Syntax
create iscsiInitiator iscsiName = "iSCSI-ID"
userLabel = "name"
host = "host-name"
[chapSecret = securityKey]
Parameters
NOTE: Challenge Handshake Authentication Protocol (CHAP) is a protocol that
authenticates the peer of a connection. CHAP is based upon the peers sharing a
“secret.” A secret is a security key that is similar to a password. Use
chapSecret only for initiators requiring mutual authentication.
Create RAID Virtual Disk (Automatic Physical Disk Select)
This command creates a disk group across the storage array physical disks,
and a new virtual disk in the disk group. The RAID controller modules in the
storage array choose the physical disks to include in the virtual disk.
Syntax
create virtualDisk physicalDiskCount=
numberOfPhysicalDisks
volumeGroupUserLabel="diskGroupName"
raidLevel=(0 | 1 | 5 | 6)
userLabel=”virtualDiskName”
[physicalDiskType=(SAS)
Parameter Description
iscsiName The default identifier of the iSCSI initiator.
userLabel The name that you want to use for the iSCSI initiator. Enclose
the name in double quotation marks (" ").
host The name of the host in which the iSCSI initiator is installed.
chapSecret The password that you want to use to authenticate a peer
connection.
book.book Page 131 Friday, March 4, 2011 10:45 AM