134 Script Commands
Create RAID Virtual Disk (Free Capacity Base Select)
This command creates a virtual disk in the free space of a disk group.
Syntax
create virtualDisk diskGroup=[diskGroupName]
userLabel=”virtualDiskName”
[freeCapacityArea=freeCapacityIndexNumber
capacity=virtualDiskCapacity
owner=(0 | 1)cacheReadPrefetch=(TRUE | FALSE)
segmentSize=segmentSizeValue
usageHint=(fileSystem | dataBase | multiMedia)]
[dssPreAllocate=(TRUE | FALSE)
securityType=(none | capable | enabled)]
enclosureLossProtect Specifies that enclosure loss protection is
enforced when creating the disk group.
To enforce enclosure loss protection, set
this parameter to TRUE. The default
setting is FALSE. For information about
the enclosureLossProtect parameter, see
"Enclosure Loss Protection" on page 52.
dssPreAllocate The setting to make sure that reserve
capacity is allocated for future segment
size increases. The default value is TRUE.
securityType The setting to specify the security level
when creating the disk groups and all
associated virtual disks.
•
none
—The disk group and virtual disks
are not secure.
•
capable
—The disk group and virtual
disks are capable of having security set,
but security has not been enabled.
•
enabled
—The disk group and virtual
disks have security enabled.
For information about securityType, see
"Security Type" on page 127.
Parameter Description
book.book Page 134 Friday, March 4, 2011 10:45 AM
To Next Page
Loading...
