Dell PowerVault MD3220 - Page 143

Script Commands 143
repositoryPercentOfSource=percentValue
repositoryUserLabel=”repositoryName”
repositoryFullPolicy=(failSourceWrites |
failSnapshot)]
Syntax (Existing Repository Disk Group)
create snapshotVirtualDisk
sourceVirtualDisk=”sourceVirtualDiskName”
[repositoryDiskGroup=”repositoryDiskGroupName”
repositoryUserLabel=”repositoryName”
freeCapacityArea=freeCapacityIndexNumber
userLabel=”snapshotVirtualDiskName”
warningThresholdPercent=percentValue
repositoryPercentOfSource=percentValue
repositoryFullPolicy=(failSourceWrites |
failSnapshot)]
Parameters
Parameter Description
sourceVirtualDisk Name of the source virtual disk from
which to take a snapshot. You must put
quotation marks (" ") around the source
virtual disk name.
repositoryRAIDLevel RAID level for the repository virtual disk.
Valid values are 0, 1, 5, or 6.
repositoryPhysicalDisks Specifies the physical disks to assign to
the repository. Specify the enclosure ID
and slot ID for each physical disk assigned
to the virtual disk. Enclosure ID values
are 0 to 99. Slot ID values are 0 to 31. You
must put parentheses around the list of
repository physical disks.
repositoryDriveCount Number of unassigned physical disks to
use for the repository virtual disk.
book.book Page 143 Friday, March 4, 2011 10:45 AM