Dell PowerVault MD3220 - Save Storage Array Events; Save Storage Array Iscsi Statistics

184 Script Commands
Save Storage Array Events
This command saves events from the Major Event Log (MEL) to a file. You
can save either all the events or only the critical events.
Syntax
save storageArray (allEvents | criticalEvents)
file="filename" [count=numberOfEvents]
Parameters
Save Storage Array iSCSI Statistics
This command saves the iSCSI performance of the storage array to a file. The
following statistics are saved to the file:
• Statistics related to the physical Ethernet port
• Statistics related to the TCP protocol
• Statistics related to the IP protocol
Syntax
save storageArray iscsiStatistics [raw | baseline]
file="filename"
Parameter Description
file Name of the file to which to save the events. You must
put quotation marks (" ") around the file name.
count Specifies the number of events or critical events to save
to a file. If you do not enter a value for the count, all
events or critical events are saved to the file. If you enter
a value for the count, only that number of events or
critical events (starting with the last event entered) are
saved to the file. Use integer values.
book.book Page 184 Friday, March 4, 2011 10:45 AM