Dell PowerVault MD3220 - Show Disk Group; Show Disk Group Export Dependencies

Script Commands 225
Show Disk Group
This command returns the following information about a disk group:
• Status (online or offline)
• Physical disk type (SAS or SATA)
• Enclosure loss protection (yes or no)
• Current owner (RAID controller module 0 or RAID controller module 1)
• Associated virtual disks and free capacity
• Associated physical disks
NOTE: You can use the free capacity area value when you create a virtual disk
based on the free capacity of a disk group. For a description of how to use the free
capacity value, see the create virtualDisk command on "Create RAID Virtual Disk
(Free Capacity Base Select)" on page 134.
Syntax
show diskGroup [diskGroupNumber]
Parameter
Show Disk Group Export Dependencies
This command shows a list of dependencies for the physical disks in a disk
group that you want to move from one storage array to a second storage array.
Syntax
show diskGroup [diskGroupName] exportDependencies
Parameter Description
diskGroup Number of the disk group for which to display
information. You must put brackets ([ ]) around
the disk group number.
book.book Page 225 Friday, March 4, 2011 10:45 AM