Dell PowerVault MD3220 - Page 228

228 Script Commands
– Status
– Capacity
– Data transfer rate
–Product ID
–Firmware level
• Physical disk channel information:
– Enclosure location and slot location
– Preferred channel
– Redundant channel
• Hot spare coverage
• Details for each physical disk
Depending on the size of the storage array, this information can be several
pages long. The physical disk information is also returned when you issue the
show storageArray profile command.
Syntax
show (allPhysicalDisks
[driveMediaType=(HDD | SSD | unknown | allMedia)]
|[physicalDiskType=(SAS)]) | physicalDisk
[enclosureID,slotID] | physicalDisks
[enclosureID1,slotID1 enclosureID2,slotID2 ...
enclosureIDn,slotIDn])
summary
book.book Page 228 Friday, March 4, 2011 10:45 AM