Dell PowerVault MD3220 - Validate Storage Array Security Key

Script Commands 261
Parameters
Validate Storage Array Security Key
This command validates the security key for a storage array that has self
encrypting disk physical disks to make sure that the security key is not
corrupt.
Syntax
validate storageArray securityKey
[file=fileName | passPhrase=passPhraseString
Parameters
Parameter Description
target Name of the target virtual disk for which to stop a virtual disk copy
operation. You must put brackets ([ ]) around the target virtual disk
name. If the target virtual disk name has special characters, you must
also put quotation marks (" ") around the target virtual disk name.
source Name of the source virtual disk for which to stop a virtual disk copy
operation. You must put brackets ([ ]) around the source virtual disk
name. If the source virtual disk name has special characters, you
must also put quotation marks (" ") around the source virtual disk
name.
Parameter Description
file The file path and the file name to which you want to save the
security key. For example,
file="C:\Program Files\CLI\sup\seckey.slk"
NOTE: You must add a file extension of .slk to the end of the file name.
passPhrase A character string that encrypts the security key so that you can store
the security key in an external file.
book.book Page 261 Friday, March 4, 2011 10:45 AM