36 About the Script Commands
iscsi-host-port-options IPV4Address=ipv4-address |
IPV6LocalAddress=ipv6-address |
IPV6RoutableAddress=ipv6-address |
IPV6RouterAddress=ipv6-address |
enableIPV4= boolean |
enableIPV6=boolean |
enableIPV4Vlan=boolean |
enableIPV6Vlan=boolean |
enableIPV6Priority=boolean |
enableIPV6Priority=boolean |
IPV4ConfigurationMethod=(static |
dhcp) |
IPV6ConfigurationMethod=(static |
auto) |
IPV4GatewayIP= ipv4-address |
IPV6HopLimit=integer |
IPV6NdDetectDuplicateAddress=
integer |
IPV6NdReachableTime=integer |
IPV6NdRetransmitTime=integer |
IPV6NdTimeOut=integer |
IPV4Priority=integer |
IPV6Priority=integer |
IPV4SubnetMask=ipv4-address |
IPV4VlanID=integer |
IPV6VlanID=integer |
maxFramePayload=integer |
tcpListeningPort=tcp-port-id|
NOTE: You must set the enableIPV4
parameter or the enableIPV6 parameter to
TRUE to ensure that the specific IPV4 or
IPV6 setting is applied.
NOTE: The IPV6 address space is
128 bits. It is represented by eight 16-bit
hexadecimal blocks separated by colons.
You may drop leading zeros, and use a
double colon to represent consecutive
blocks of zeroes.
Table 2-4. Recurring Syntax Elements
(continued)
Recurring Syntax Syntax Value
book.book Page 36 Friday, March 4, 2011 10:45 AM
To Next Page
Loading...
