134 Configuration: Disk Groups and Virtual Disks
Suspending the Media Scan
You cannot perform a media scan while performing another long-running
operation on the disk drive such as reconstruction, copy-back,
reconfiguration, virtual disk initialization, or immediate availability
formatting. If you want to perform another long-running operation, you
should suspend the media scan.
NOTE: A background media scan is the lowest priority of the long-running
operations.
To suspend a media scan:
1
In the AMW, select the
Logical
tab and select any virtual disk.
2
Select
Virtual Disk
Change
Media Scan Settings
.
The
Change Media Scan
Settings window is displayed.
3
Select
Suspend media scan
.
NOTE: This applies to all the virtual disks on the disk group.
4
Click
OK
.
book.book Page 134 Monday, June 21, 2010 11:00 AM
To Next Page
Loading...
