208 Management: Installing Array Components
Figure 15-14. Removing and Installing the Control Panel—PowerVault MD3220
Installing the Control Panel
1
Align the control panel with the slot on the array.
2
Slide the control panel into the array until:
– The release tab clicks into place in
PowerVault MD3200
. See
Figure 15-13.
– The release pin clicks into place in
PowerVault MD3220
. See
Figure 15-14.
3
Replace the hard drives in their respective slots. See "Installing a Hard
Drive" on page 194.
4
Connect all the power cables to the array.
5
Turn on the array and the host server.
1 control panel 2 release pin
book.book Page 208 Monday, June 21, 2010 11:00 AM
To Next Page
Loading...
