Dell PowerVault MD3220 - Removing a Host Group; Host Topology

88 Configuration: About Your Host
4 Click Yes .
The host is moved to the selected host group with the following mappings:
• The host retains the specific virtual disk mappings assigned to it.
• The host inherits the virtual disk mappings assigned to the host group
to which it is moved.
• The host loses the virtual disk mappings assigned to the host group
from which it was moved.
Removing a Host Group
To remove a host group:
1
In the AMW, select the Mappings tab, select the host node in the
Topology pane.
2 Perform one of these actions:
• Select
Mappings  Remove .
• Right-click the host node, and select
Remove from the pop-up menu.
The
Remove dialog is displayed.
3 Click Yes .
The selected host group is removed.
For more information, see the PowerVault Modular Disk Storage Manager
online help topics.
Host Topology
Host topology is the organization of hosts, host groups, and host interfaces
configured for a storage array. You can view the host topology in the Mappings
tab of the AMW. For more information, see "Using the Mappings Tab" on
page 84.
The following tasks change the host topology:
• Moving a host or a host connection
• Renaming a host group, a host, or a host connection
• Adding a host connection
• Replacing a host connection
book.book Page 88 Monday, June 21, 2010 11:00 AM