16 Hardware Installation
• If the status LEDs light solid amber, the storage array is still
coming online.
• If the status LEDs are blinking amber, there is an error that can be
viewed using MDSM.
• If the status LEDs light solid blue, the storage array is ready.
c
After the storage array is online and ready, turn on any attached host
systems.
7
Using MDSM, update all attached expansion enclosure firmware if it is out
of date:
a
From the EMW, select the enclosure that you want to update and
enter the
Array Management Window
(AMW). Click
Advanced
Maintanence
Download
EMM Firmware
.
b
Select
Select All
to update all the attached expansion enclosures
simultaneously.
book.book Page 16 Friday, May 20, 2011 4:07 PM
To Next Page
Loading...
