Contents 5
Default Management IPv4 Port Settings . . . . . . 58
Automatic Storage Array Discovery . . . . . . . . 59
Manual Storage Array Discovery
. . . . . . . . . 60
Setting Up the Array
. . . . . . . . . . . . . . . . 60
Step 2: Configure the iSCSI Ports on the
Storage Array
. . . . . . . . . . . . . . . . . . . . . . 61
Step 3: Perform Target Discovery From the
iSCSI Initiator
. . . . . . . . . . . . . . . . . . . . . . 63
Step 4: Configure Host Access
. . . . . . . . . . . . . 65
Understanding CHAP Authentication
. . . . . . . . . . 66
What is CHAP?
. . . . . . . . . . . . . . . . . . . 66
Target CHAP
. . . . . . . . . . . . . . . . . . . . 66
Mutual CHAP
. . . . . . . . . . . . . . . . . . . . 66
CHAP Definitions . . . . . . . . . . . . . . . . . . 67
Step 5: Configure CHAP Authentication on the
Storage Array (Optional)
. . . . . . . . . . . . . . . . . 67
Configuring Target CHAP Authentication
on the Storage Array
. . . . . . . . . . . . . . . . 67
Configuring Mutual CHAP Authentication
on the Storage Array
. . . . . . . . . . . . . . . . 68
Step 6: Configure CHAP Authentication on the
Host Server (Optional)
. . . . . . . . . . . . . . . . . . 69
Step 7: Connect to the Target Storage Array From the
Host Server
. . . . . . . . . . . . . . . . . . . . . . . . 73
Step 8: (Optional) Set Up In-Band Management
. . . . 77
book.book Page 5 Wednesday, December 29, 2010 9:23 PM
To Next Page
Loading...
