Dell PowerVault MD3600i - Page 71

Appendix—Manual Configuration of iSCSI 71
If you are using Red Hat Enterprise Linux 5, Red Hat Enterprise Linux 6,
SUSE Linux Enterprise Server 10, or SUSE Linux Enterprise Server 11:
1
To enable CHAP (optional), the following line needs to be enabled in your
/etc/iscsi/iscsid.conf file:
node.session.auth.authmethod = CHAP
2
To set a user name and password for CHAP authentication of the initiator
by the target(s), edit the following lines:
node.session.auth.username =
<iscsi_initiator_username>
node.session.auth.password =
<CHAP_initiator_password>
3
If you are using Mutual CHAP authentication, you can set the user name
and password for CHAP authentication of the target(s) by the initiator by
editing the following lines:
node.session.auth.username_in=
<iscsi_target_username>
node.session.auth.password_in =
<CHAP_target_password>
4
To set up discovery session CHAP authentication, first uncomment the
following line:
discovery.sendtargets.auth.authmethod = CHAP
5
Set a user name and password for a discovery session CHAP authentication
of the initiator by the target(s) by editing the following lines:
discovery.sendtargets.auth.username =
<iscsi_initiator_username>
discovery.sendtargets.auth.password =
<CHAP_initiator_password>
6
To set the user name and password for discovery session CHAP
authentication of the target(s) by the initiator for Mutual CHAP, edit the
following lines:
discovery.sendtargets.auth.username =
<iscsi_target_username>
book.book Page 71 Wednesday, December 29, 2010 9:23 PM