Dell PowerVault MD3600i - Page 77

Appendix—Manual Configuration of iSCSI 77
NOTE: Configure the management station you are using for network
communication to the same IP subnet as the MD36x0i host ports.
1 Establish an iSCSI session to the MD3600i RAID storage array.
2 Restart the SMagent service.
3 Launch MDSM.
If this is the first storage array to be set up for management, the
Add New
Storage Array
window appears. Otherwise, click New .
4 Select Manual and click OK .
5 Select In-band management and enter the host server name(s) or IP
address(es) of the host server that is running the MD Storage Manager
software.
6 Click Add .
In-band management should now be successfully configured.
book.book Page 77 Wednesday, December 29, 2010 9:23 PM