Dell PowerVault MD3620i - Removing Host Access

102 Configuration: About Your Host
The Specify Host Type window is displayed.
7 In Host type, select the relevant operating system for the host.
The
Host Group Question window is displayed.
8 In this window, you can select:
•
Yes —this host shares access to the same virtual disks with other hosts.
•
No —this host does NOT share access to the same virtual disks with
other hosts.
9 Click Next .
If you select
Yes , the Specify Host Group window is displayed. If you
select
No , see step 11.
10 Enter the name of the host group or select an existing host group and click
Next .
The
Preview window is displayed.
11 Click Finish .
Removing Host Access
To remove host access:
1
In the AMW, select the Mappings tab, select the host node in the
Topology pane.
2 Perform one of these actions:
• Select
Mappings  Remove .
• Right-click the host node and select
Remove from the pop-up menu.
The
Remove confirmation dialog is displayed.
3 Ty p e yes .
4 Click OK .
For more information, see the PowerVault Modular Disk Storage Manager
online help topics.
book.book Page 102 Tuesday, September 27, 2011 3:13 PM