Dell PowerVault MD3620i - Removing a Host Group; Host Topology

Configuration: About Your Host 105
Removing a Host Group
To remove a host group:
1
In the AMW, select the Mappings tab, select the host node in the
Topology pane.
2 Perform one of these actions:
• Select
Mappings  Remove .
• Right-click the host node, and select
Remove from the pop-up menu.
The
Remove dialog is displayed.
3 Click Yes .
The selected host group is removed.
For more information, see the PowerVault Modular Disk Storage Manager
online help topics.
Host Topology
Host topology is the organization of hosts, host groups, and host interfaces
configured for a storage array. You can view the host topology in the
Mappings tab of the AMW. For more information, see "Using the Mappings
Tab" on page 100.
The following tasks change the host topology:
• Moving a host or a host connection
• Renaming a host group, a host, or a host connection
• Adding a host connection
• Replacing a host connection
• Changing a host type
MDSM automatically detects these changes for any host running the host
agent software.
book.book Page 105 Tuesday, September 27, 2011 3:13 PM