Entering User Access Information using the Web User
Interface
This function, other than the Access PIN, is not available on the Operator Control
Panel.
1. Click User Access in the left navigation pane.
2. Choose an Access Level. The Access Level Name associated with the Access
Level chosen
v 1 - User
v 2 - Admin
v 3 - Service
3.
Enter the New Password.
4. In Repeat Password, enter the new password again.
5. In Support Name, enter the name of the person that will be able to offer the
user help with the library.
6. In Support Phone, enter the phone number of the person that will be able to
offer the user help with the library.
7. In Support Email, enter the email address of the person that will be able to
offer the user help with the library.
8. Click one of the following:
v Refresh - to update the current screen.
v Submit - to apply the changes made to the screen.
Entering Date and Time using the Web User Interface
1. Click Date & Time in the left navigation pane.
2. Enter the current Time using the HH:MM:SS format.
3. Enter the current Date using the MMDDYYYY format.
4. Click one of the following:
v Refresh - to update the current screen
v Submit - to apply changes made to the current screen
a77ug082
Figure 1-21. The Configure Library: User Access screen
1-18 Getting Started with the Dell PowerVault TL2000 and TL4000 Tape Libraries
To Next Page
Loading...
